Mountingtheperforatedplatecover
Velcrotape
Mountingthedashboardholder
Thenscrewthetensingbuttonwiththewasher
backagaintoimmobilisethehandlebars.
24
Thetensingbuttonmustbeunscrewed
andremovedbeforethedashboard
holdercanbeattached.
engagethedashboardholderwiththehousing.
Mountingthecovercap
Closetheopeningholeintheperforatedplateon
therightsidewiththecovercap.
Reassembletheperforatedplatecoverontheleftside.Startbypressingitonthetopendandthenonthelowerpart.