10
CT Series Traction Control
www.moretraction.com
HEI Users
NOTE: It is very important that any HEI
Distributor be properly grounded.
Run a heavy gauge ground wire from the
distributor body to each cylinder head.
BOLTED IN THE ENGINE IS NOT GOOD
ENOUGH!
(A gasket at the distributor base, and any type of
plated clamp prevents the coil from getting a
sufficient ground for the ignition to function
properly)
Wiring
See Appendix A for specific
connection details for various
ignition systems.
To Next Page
Loading...
Need help?
General