31
CT Series Traction Control
www.moretraction.com
MSD® Pro Mag® (discrete)
(Set Point Output to “None”)
Connect pin 1 to 6-20v+ (Battery Positive).
Connect pin 4 to 6-20v- (Battery Ground) .
Connect pin 6 to negative distributor pickup wire.
This should be the green wire coming out of the
ignition box.
Connect pin 7 to positive distributor pickup wire.
This should be the purple wire coming out of the
ignition box.
A toggle switch may be used, if desired to turn the
unit on/off.
*Max Retard=20 deg
A 9v battery can also be used to power the unit. Use
a quality battery such as an Energizer or Duracell
brand for the best battery life, approx. 3-4 hours. A 6-
21v hobby battery may also be used for greatly
extended battery life.
Note: The unit draws about 80 mAh of current. The
9v batteries mentioned above have approx. 400mAh
capacity and should last about 4 hours. A 2000 mAh
hobby battery will last about 24 hours of continuous
use.
To Next Page
Loading...