9
CT Series Traction Control
www.moretraction.com
Installation
Installation of the system is very simple. It is very
important to make all connections correctly.
Improper installation could result in poor system
performance or damage to the unit.
Keep all wires away from any spark plug wires and
coils or other sources of electrical noise and heat.
The unit should be mounted away from any sources
of electrical noise or high heat. It can be easily
mounted with Velcro to allow for easy removal.
It is very important that the distributor pickup wires
are kept away from the spark plug and coil leads.
As with all electronic devices, proper wiring
techniques and methods will result in the best
performance. Proper terminations, wire routing and
overall quality of work are required for proper
operation. You may want to refer to this document
for some tips on basic wiring principles-
https://moretraction.com/wp-
content/uploads/2019/01/Wiring-How-To_Web.pdf.
To Next Page
Loading...
Need help?
General