Daviscomms Br502 - Setting the Daily Alarm

12
FUNCTION MENU
:
Setting the Alarm
Your Br502 pager allows you to set a daily alarm.
- From the Status screen, press the (Function) button 4 times until the
" " screen displayed
- A flashing " " or " " appears, toggle the (Function) button to
select ON or OFF. Press the (Read/ Select) button to confirm your
selection
Note: If you select OFF the pager will return to the Status screen. If you
select ON proceed to the next step
- Press the (Read/ Select) button to select the hour, then press the
(Function) button to set the hour
- Repeat the above steps to set minutes and " " or " ", if your pager is
set to display 12 hour time format
- When completed, press the (Read/Select) button to save your
changes and return to the Status Screen