46
220i
DriveRack
®
User Manual
A.3 - Program List
Factory Program List
1. Stereo & AFS - Designed for Stereo systems.
2. Two Mics - Processing for two separate microphones.
3. Mic Mix - Processing and mixing two microphones together.
4. Page 2 Zones - With a microphone in ch. 1 and music in ch. 2 this will send both music and
page announcements to both outputs.
5. Restaurant - With a setup similar to #4, the music is sent to both outputs, but the paging only
occurs in output 2 (Lobby).
6. Auto Dealer - Similar to programs #4 and #5, but the music is only sent to the output #2
(Showroom), while paging is sent to both outputs.
7. Room Comb-1 - This program is the first of two that allows room combining. In this program
the rooms are separate.
8. Room Comb-2 - This program is the second of two programs that provide room combining.
This program combines the two rooms with inputs from either room being sent to both rooms.
9. Crossover - This program uses input 1 as the source for a bi-amp crossover at 100 Hz.
10. Mix & XOver - Like program #9, this program provides crossover functions, with the addition
of mixing together inputs 1 and 2.
Programs 11-20 are duplicates of these first 10.
Appendix
To Next Page
Loading...
