31
Chapter 4
Browser
Management
This Chapter describes how to manage the
EtherSeries Gateway using a Web Browser.
Overview
This method uses your Web Browser to manage the gateway.
This provides a more user-friendly interface than the
Telnet/Terminal method.
• The unit must be installed in your LAN and have a
compatible IP address before this configuration method
can be used.
• Most Browsers will work. The only requirement is that they
support HTML tables and forms. If your browser uses a
proxy, the proxy function may need to be disabled.
Connection Procedure
To establish a connection to the gateway , follow this
procedure:
1. Install the unit in your LAN as described in Chapter 2.
Ensure that it is powered on and there is a link light on the
hub or ethernet switch.
To Next Page
Loading...