Decagon Devices KD2 Pro - Page 27

KD2 Pro 3 THE MENUS
Press Enter to select the Time display and follow the same pro-
cedures as setting the date.
Units
You can choose to represent measurement data in either SI or English
units. Press Enter to select an option.
Table 3: SI and English Unit Equivalents
Thermal Thermal Volumetric Thermal
Conductivity Resistivity Specific Heat Diffusivity
(K) (ρ) (
◦
C) (D)
SI
W
(m∗K)
◦
C∗cm
W
MJ
(m
3
∗K)
mm
2
s
English
BT U
hr∗ft∗
◦
F
hr∗ft∗
◦
F
BT U
BT U
◦
F ∗ft
3
ft
2
hr
Note: Readings in watts per meters Celsius(
W
m
∗
◦
C) are the same as
readings in watts per meters Kelvin (
W
m
∗ K), as Celsius and Kelvin
degrees are on the same temperature scale.
Read Time
Allows you to change the read time duration for each sensor type.
To change the read time select the sensor, press Enter, and scroll
through the read time options. Press Esc or Menu to accept the
changes and exit the Power Mode menu. For information on which
read time to use refer to Section 2.
23