b
Selection of the comfort mode period x
4 Steady symbol: Comfort mode selection active
4 Flashing symbol: Comfort mode selection inactive
v Selection of the reduced mode period Vm
4 Steady symbol: Reduced mode selection active
4 Flashing symbol: Reduced mode selection inactive
P
Indicator showing the end of override
AUTO
Operation in automatic mode according to the timer
programme
x
Comfort mode: The symbol is displayed when a DAY
override (comfort) is activated
4 Flashing symbol: Temporary override
4 Steady symbol: Permanent override
m
Reduced mode: The symbol is displayed when a NIGHT
override (reduced) is activated
4 Flashing symbol: Temporary override
4 Steady symbol: Permanent override
g
Holiday mode: The symbol is displayed when a HOLIDAY
override (antifreeze) is activated
4 Flashing symbol: Holiday mode programmed
4 Steady symbol: Holiday mode active
w
Cooling mode: The symbol is displayed when a COOLING
override is activated in summer
4 Flashing symbol: Temporary override
4 Steady symbol: Permanent override
p
Summer mode: The heating is off. Domestic hot water
continues to be produced
b
WINTER mode: Heating and domestic hot water working
r
The symbol is displayed when domestic hot water
production is available on the installation
m
Manual mode
1.2 Energy savings management
If no actions are performed for 20 seconds, the remote control goes into
standby (backlight off).
Pressing any key or using the rotary button switches on the backlight.
1. Description
CDR4 - Package AD253 - Package AD284
36
23/06/2011 - 300020530-001-C
EN
To Next Page
Loading...
Need help?
General
