DeFelsko PosiTector 6000 - Batch Management: Open and Close Operations; Opening Existing Batches; Closing the Active Batch

19
Open
Lists all stored batches. Select the desired batch to open.
Additional measurements can be added to existing batches only if
the original probe is attached to the PosiTector SmartLink.
Opening a batch that was not created with the currently
attached probe will disconnect the PosiTector SmartLink from the
PosiTector App. You will still be able to add notes, photos, etc. to
the batch.
NOTE:
Close
Closes the current batch and turns Memory OFF.
Batch measurement data is retained when a batch is closed.