1
Introduction
Introduction
PosiTector 6000 probes non-destructively measure the thickness of
coatings on metals, quickly and accurately. This instruction manual
specifically covers use with PosiTector SmartLink.
The PosiTector SmartLink and free mobile app allow you to wirelessly
connect a wide selection of PosiTector probes to your smart device.
Take full advantage of your device's keyboard, microphone, camera,
internet data connection, etc. to simplify and enhance your
measurement inspection process.
The PosiTector SmartLink measurement solution consists of a
PosiTector App, PosiTector SmartLink device and compatible
PosiTector probe.
In addition to the PosiTector 6000, compatible probes include the
PosiTector SPG/RTR-H (surface profile) and DPM (environmental
conditions).
To Next Page
Loading...
