Page 9
Microwave cooking.
1. Press the MW button. The MW indicator lights up.
“P-HI” is displayed.
2. Select the power level by pressing the MW button
repeatedly until the appropriate level is displayed
( from 100% to 10%).
3. Turn the dial knob to set the desired cooking time.
The selected time is displayed.
4. Press the START/SPEEDY COOK button. The
oven light switches on and the tray starts rotating.
5. Cooking commences and the remaining time is
counted down in the display.
6. The power level may be checked during the cook-
ing cycle by pressing the MW button The power
level will then be displayed for about 3 seconds.
7. At the end of the cooking period the oven will beep
3 times.
8. Open the door, remove the cooked food and press
the STOP/CLEAR button.
Power level table.
Microwave cooking allows you to set the desired power level and the duration of the cooking pe-
riod.
The oven will automatically cook at 100% power unless a lower power level is selected.
To activate microwave cooking , proceed as follows:
Power level
Percentage
Output
P-HI 100% 900W
P-90
90% 810W
P-80 80% 720W
P-70 70% 630W
P-60 60% 540W
P-50 50% 450W
P-40
40% 360W
P-30 30% 270W
P-20 20% 180W
P-10 10% 90W
P-00 0% 0W
To Next Page
Loading...
Need help?
General
