Deif AGC-4 - 4.2.4 Parameter Reading and Configuration; 4.2.4 Read Parameters from Device; 4.2.5 Basic Device Configuration

4.2.4 Read parameters from the device
Open the "Parameters" list.
Click the "Read parameters
from the device" icon.
After retrieving all the parameters, the device is ready to be configured.
4.2.5 Basic configuration of a device using the utility software
When the parameters have been uploaded, the options below will be available.
Click the "Gen"
tab.
The parameters can be configured as follows:
Click a parameter and the dialogue box below will appear.
AGC-4 quick start guide 4189340689 UK
The first steps
DEIF A/S Page 18 of 26