Deif AGC-4 - Controller Setup; Controllers Available; Controller Output Types

5.3 Controller setup
5.3.1 Controllers available
Governor (std.)
1. Synchronisation (static and dynamic sync.)
2. Phase angle (static sync.)
3. Frequency
4. Power
5. Load sharing
AVR (option D1)
1. Voltage
2. Reactive power
3. Reactive load sharing
5.3.2 Controller output types
Analogue (option E1, E2, EF2 or EF4)
Transducer output 66 or 71
Relays (std.)
Normally relays 65, 67, 69 and 71, but any configurable relay can be used
AGC-4 quick start guide 4189340689 UK Display push-buttons and LEDs
DEIF A/S Page 23 of 26