1.1.5 Factory settings
The Multi-line 2 unit is delivered from factory with certain factory settings. These are based on average values
and are not necessarily the correct settings for matching the engine/generator set in question. Precautions
must be taken to check the settings before running the engine/generator set.
1.2 About the Quick Start Guide
1.2.1 General purpose
This Quick Start Guide mainly includes general product information, mounting instructions and wiring descrip-
tions.
The general purpose of this document is to help the user with the first steps of installing and using the Multi-
line 2 system.
Please make sure that you also read the Installation Instructions before starting to work with
the Multi-line 2 unit and the genset to be controlled. Failure to do this could result in human
injury or damage to the equipment.
1.2.2 Intended users
This Quick Start Guide is mainly intended for the panel builder in charge. On the basis of this document, the
panel builder designer will give the electrician the information he needs in order to get started with the instal-
lation. For detailed electrical drawings, please see the Installation Instructions.
1.2.3 Contents and overall structure
This document is divided into chapters, and in order to make the structure simple and easy to use, each
chapter will begin from the top of a new page.
AGC-4 quick start guide 4189340689 UK General information
DEIF A/S Page 4 of 26
To Next Page
Loading...
Need help?
General
