Deif AGC-4 - Display Navigation

5.2.2 Display navigation
Setup structure
2010-01-02 09.35.54
SETUP V3 V2 V1
AGC V.4.00.0
PROT CTRL I/O SYST
G 400 400 400V
f-L1 50.00HZ
PROTECTION SETUP
f-L1 50.00HZ
CONTROL SETUP
G 400 400 400V
PROT CTRL I/O SYST
f-L1 50.00HZ
INPUT/OUTPUT SETUP
G 400 400 400V
PROT CTRL I/O SYST
f-L1 50.00HZ
SYSTEM SETUP
G 400 400 400V
PROT CTRL I/O SYST
SP DEL OA OB ENA FC
1000 G -P> 1
Setpoint -5.0%
G 400 400 400V
SYNC REG
CONTROL SETUP
SYNCHRONISE SETUP
G 400 400 400V
BIN AIN OUT
INPUT/OUTPUT SETUP
BINARY INPUT SETUP
G 400 400 400V
GEN MAINS COMM PM
SYSTEM SETUP
GENERAL SETUP
G 400 400 400V
BACK
SEL
BACK
SEL
BACK
SEL
BACK
SEL
BACK
SEL
Setup example
The following example illustrates how a specific setting is changed in the setup menu. In this case, nominal
voltage "Nom. U 1" is the selected parameter.
First entry
Increase no.
Decrease no.
Increases setting
Decreases setting
Moves the cursor
YES
NO
PROT CTRL I/O SYST
G 400 400 400V
G f-L1 50.00HZ
PROTECTION SETUP
G 400 400 400V
SP DEL OA OB ENA FC
1000 G -P> 1
Setpoint -5.0%
G 400 400 400V
SP DEL OA OB ENA FC
1010 G -P> 2
Setpoint -5.0%
ENTER
Enter passw. 2010
G 400 400 400V
RESET SAVE
1001 G -P> 1
-50.0 -5.0 0.0%
G 400 400 400V
BACK
BACK
For further information, please refer to the Designer’s Reference Handbook.
AGC-4 quick start guide 4189340689 UK Display push-buttons and LEDs
DEIF A/S Page 22 of 26