Deif GPC-3 Quick Start Guide

No. Setting Min.
Max.
Factory
setting
Notes Ref. Description
2782 Reg.
output
AVR Relay
Analogue
Relay Option:
AVR control
(D1)
Generator voltage control
based on relay or ana-
logue output signals. An-
alogue selection is only
available if option E1, E2,
EF2, EF4 or F2 is
present.
5980 Governor output
5981 Gover-
nor out-
put
Output A Disabled
AO66
AO71
Disa-
bled
Option E and
F
Normally used: Analogue
output 66
5990 AVR output
5991 AVR out-
put
Output A Disabled
AO66
AO71
Disa-
bled
Option D Normally used: Analogue
output 71
AVR control requires option D1.
Analogue outputs require option E1, E2, EF2, EF4 or EF5.
For further information, please refer to the document "General Guidelines for Commissioning".
For further information, please check the following documents:
GPC-3 Designer’s Reference Handbook Document no. 4189340587
GPU-3 Designer’s Reference Handbook Document no. 4189340584
GPU-3 Hydro Designer’s Reference Handbook Document no. 4189340588
PPU-3 Designer’s Reference Handbook Document no. 4189340583
GPC-3/GPU-3/GPU-3 Hydro/PPU-3 Installation Instructions Document no. 4189340582
GPC-3/GPU-3/GPU-3 Hydro/PPU-3 Operator’s Manual Document no. 4189340579
ML-2 quick start guide 4189340603 UK Configuring the speed governor and AVR
outputs
DEIF A/S Page 23 of 23

Deif GPC-3 Specifications

General

Brand	Deif
Model	GPC-3
Category	Controller
Language	English