Deif PPU-3 - Page 9

PPU-2 Description PPU-3 Option type
Option EF4 +/-20 mA for speed governor or AVR
2 × relay outputs for speed governor or AVR
N/A Hardware
Option EF5 1 × PWM (Pulse Width Modulated) output for
CAT speed governor
+/-20 mA for speed governor or AVR
2 × relay outputs for speed governor or AVR
N/A Hardware
Option F1 2 × 0(4) to 20 mA transducer out Option F1 Hardware
Option F2 (GPU) 4 × 0(4) to 20 mA transducer out N/A Hardware
Option G1 Start/stop of next DG outputs Standard
Option G2 (GPU) Synchronisation with relay outputs N/A SW and HW op-
tion
N/A Synchronisation (HW for GOV/AVR interface
must be selected separately)
Option G2
(GPU)
Software
Option H1 CANopen Hardware
Option H2 and
H3
Modbus and Profibus DP Option H2 and
H3
Hardware
Option H4 CAT CCM N/A Hardware
Option H5 Reading of J1939 values Option H5 Hardware
Full J1939 engine
Option H6 Cummins GCS Option H6 Hardware
N/A Engine communication - CAN bus J1939 Option H7 Hardware
N/A CAN bus interface for external I/O modules
(Beckhoff) in slot #2 or slot #8
Option H8.x Hardware
N/A Modbus RTU/ASCII (RS-232) and GSM modem
connection
Option H9.2 Hardware
Option J1 Display cable, 3 m Standard Hardware
Option J2 Display cable, 6 m Option J2 Hardware
Option J3 PC cable for utility software (RS-232) N/A Hardware
N/A PC cable for option N-programming Option J4 Hardware
Option J6 Display cable, 1 m Option J6 Hardware
N/A PC cable for utility software (USB), 1 m Option J7 Hardware
Option K1 and K2 Documentation Option K1 and
K2
Hardware
Option M1 and
M2
Engine control and protection N/A
N/A Engine control and protection (safety system) Option M4 Hardware
Option M13 7 digital inputs in slot #8 N/A Hardware
N/A 7 digital inputs in slot #6 and/or slot #8 Option M13.x Hardware
Option M14 4 relay outputs in slot #8 N/A Hardware
N/A 4 relay outputs in slot #6 and/or slot #8 Option M14.x Hardware
ML-2 application notes Converting PPU-2
to PPU-3 4189341126 UK
Application and installation
DEIF A/S Page 9 of 18