PPM Installation Instructions
DEIF A/S Page 4 of 69
2. Warnings and legal information
Legal information and responsibility
DEIF takes no responsibility for installation or operation of the generator sets. If there is any
doubt about how to install or operate the generator sets controlled by the PPM system, the
company responsible for the installation or the operation of the sets must be contacted.
Electrostatic discharge awareness
Sufficient care must be taken to protect the terminals against static discharges during the
installation. Once the system is installed and connected, these precautions are no longer
necessary.
Safety issues
Installing the system implies work with dangerous currents and voltages. Therefore, the
installation should only be carried out by authorised personnel who understand the risks involved
in working with live electrical equipment.
Be aware of the hazardous live currents and voltages. Do not touch any AC
measurement inputs as this could lead to injury or death.
The system units are not to be opened by unauthorised personnel. If opened anyway,
the warranty will be lost.
To Next Page
Loading...
