Delem DAC-310 - General Remarks; Outputs; Components Check

Delem
V0804, 3.2
1. General remarks
1.1. Outputs
Before starting the diagnostic program it is wise to check the machine for moving parts. This
is because during the diagnostic operation of the control no regulation of the axis is
performed.
With the diagnostic program you have to be careful because all I/O is controlled. All digital
and analog outputs can be energised for motor movement or relay switching.
1.2. Components check
In the description of the tests it is indicated which component(s) is(are) responsible for correct
functioning of that particular part.
See for exploded view drawing with all internal cables and cards of the DAC-310 control the
included diagrams at the end of part I.