Delem DAC-310 - DAC-310 Program Constants; Selecting Program Constants; Program Constants Explained

Delem
V1204, 2.13
2.4. Parameter explanation
Parameter 00:
Software version
Range : -
Unit : -
Default : -
Function
Version number of the current software.
Parameter 01:
Drive type
Range : 1 - 3
Unit : -
Default : 3
Function
The type of motor system that is to be controlled.
1 = 1-speed AC or DC drive
2 = 2-speed AC or DC drive
3 = Servo motor drive
Parameter 02:
Encoder count direction
Range : 0 - 1
Unit : -
Default : 0
Function
To change the counting direction of the axis encoder pulses.