Need help?Do you have a question about the Delem DAC-360 and is the answer not in the manual?
General| Brand | Delem |
|---|---|
| Model | DAC-360 |
| Category | Controller |
| Language | English |
Provides a general overview of the DAC-360 control unit.
Details the physical, environmental, and technical specifications of the DAC-360.
Outlines the physical size and mounting dimensions of the control.
Specifies operating and storage requirements for temperature and humidity.
Lists key technical details like power supply, display, and interfaces.
Explains the input/output connectors and their functions on the control.
Introduces the system's input/output (I/O) architecture.
Details the connections for power supply and analog output signals.
Describes the specifications for analog inputs and outputs.
Explains the configuration and capabilities of digital inputs and outputs.
Details the encoder interface and its connection specifications.
Lists the available spare parts for the DAC-360 control unit.
Provides references to various technical schematic diagrams for the DAC-360.
Explains the different categories and types of machine parameters available.
Details the procedure for accessing the machine parameter menu using an access code.
Describes the supported axis control types: AC, DC, and Servo drives.
Lists parameters specific to servo drive configurations.
Discusses parameters relevant to AC drive systems and their control.
Explains the unipolar system for movement control using analog output.
Describes how to program a table to correct axis position errors.
Details various machine parameters for configuring the DAC-360.
Covers fundamental settings like sheet thickness and cutting length.
Configures parameters related to the backgauge axis control.
Details parameters necessary for controlling the angle of the cutting blade.
Explains parameters for adjusting and controlling the gap.
Covers parameters that define and manage the stroke function.
Details parameters for controlling cutting and clamping forces.
Introduces the diagnostic program for testing the DAC-360 control.
Provides important safety notes and considerations before using the diagnostic program.
Outlines the steps to access the diagnostic test menu using an access code.
Explains how to test digital inputs, outputs, analog signals, and encoder functions.
Describes how to view control status and I/O behavior in different modes.
Explains how to save and restore control settings to and from a PC.
Details the procedure for updating the control's software with new versions.
Lists access codes required to enter special menus and functions.
Explains the meaning of status and error codes shown on the control screen.
To Next Page
