V0208, 0.2
PREFACE
In this installation manual you find information how to connect and program a DAC-360 shear
control for operation with an industrial shear.
LIMITED WARRANTY
• The equipment is supplied by Delem without safety features. The machine manufacturer
has to ensure a safe environment.
• This equipment must be installed and used in accordance with Delem's specifications.
The guarantee on the equipment is invalidated in the event of improper installation and/
or use of this equipment.
• The General Terms and Conditions of Delivery of Delem shall apply to this product.
These conditions are available from Delem on request.
• This manual does not entitle you to any rights. Delem reserves the right to change this
manual without prior warning.
• All rights reserved. The copyright is held by Delem. No part of this publication may be
copied or reproduced without written permission from Delem BV.
To Next Page
Loading...
