Delem DAC-360 - 2. Machine Parameters Configuration; General Parameters

V0208, 2.8
2. The machine parameters
2.1. General parameters
Parameter 13
Maximum thickness
Range : 0.1 - 99.9
Unit : mm
Default : 1.0
Function
The maximum sheet thickness the machine can cut.
Parameter 14
Maximum cutting length
Range : 0.0 - 15000.0
Unit : mm
Default : 1000.0
Function
The maximum length the machine can cut. This setting will effect the maximum possible sheet
length, in combination with other settings.
2.f
Parameter 15
Auto mode enabled
Range : 0 - 1
Unit : -
Default : 1
Function