Need help?Do you have a question about the Delem DA-53T and is the answer not in the manual?
General| Brand | Delem |
|---|---|
| Model | DA-53T |
| Category | Controller |
| Language | English |
Describes the physical appearance, front control elements, and USB port of the DA-53T control unit.
Explains the main screen layout, navigation panel, modes, text input, keyboard, messages, keylock, manual positioning, and software versions.
Outlines the steps for creating and modifying bend programs, differentiating Auto and Manual modes.
Details necessary preparations for programming and procedures for backing up data to external storage.
Describes the product library view, item details, and how to select and load programs for production or modification.
Explains how to create new programs, edit, copy, delete, and rename existing product programs.
Introduces tool configuration, the standard procedure for selecting punches and dies from the tool library.
Explains how to start product programming and introduces the program mode interface.
Details various bend parameters, force, speed, functions, product properties, tools, and auxiliary axes.
Covers editing views, changing tools, product properties, adding bends, bumping, and understanding programming parameters.
Introduces Auto mode for starting production and executing programs bend by bend.
Lists parameters in Auto mode, focusing on Corrections, General corrections, and explains available view modes.
Describes specific views in Auto mode: Main, All bends, Macro, Manual positioning, Corrections, Diagnostics.
Introduces Manual mode for programming parameters for one bending, useful for testing and calibration.
Lists and explains bend parameters, tools, auxiliary axes, and functions available in Manual mode.
Details how corrections are shown and can be modified in Manual mode, and explains Diagnostics and IO status views.
Explains general settings like units, language, keyboard layout, and message sound.
Details how to program, edit, add, or delete materials and their properties.
Covers backup/restore procedures for products, tools, settings, and program-specific settings like angle corrections.
Explains default values, computation settings, production settings, and time/date formats.
Explains how to program punches, create new ones, and define their properties like standard, hem, or big radius.
Details how to program bottom dies, create new ones, and define their properties like standard, hem, or inside hem.
Covers backgauge dimensions, offsets, and position corrections for auxiliary axes.
Explains maintenance functions, diagnostic modes, system information, and software updates.
To Next Page
