V0817, 7.2
7.2. General
Select the required tab and tap the parameter to be changed. When parameters have a
numerical or alphanumerical value, the keyboard will appear to enter the desired value. When
the setting or parameter can be selected from a list, the list will appear and selection can be
done by tapping. Longer lists allow scrolling vertically to check the available items.
Inch/mm-select
Select to use either millimeters or inches as the unit to be used.
Ton/kN select
Select to use either Ton or kN as the main unit to be used for all force data.
Resistance per m/mm selection
Select to use the resistance either per meter or per millimeter.
Language
The user interface language can be selected from the list. There are more available
languages than initially shown. Scroll vertically by dragging the list up en down to see all
available languages. Tap to select the desired language for the user interface.
(For languages using special, non standard alphanumerical characters, the control will
reboot.)
Keyboard layout
Upon choice one can select Qwerty, Qwertz or Azerty keyboard layout.
Key sound
Switch the sound function of the input panel on or off.
To Next Page
Loading...
Need help?
General
