Delem DA-53T - Product Properties; Tools; Auxiliary Axes

V0817, 4.7
4.2.5. Product properties
Thickness
The thickness of the sheet.
Material
The material of the product.
4.2.6. Tools
The set tools are displayed and can be modified from the Tool Setup menu. If required the
tools per bend can be specifically selected for that bend using Change Tools.
Punch
The name (ID) of the selected punch. Tap Change Tools to modify or select from the
punch library.
Die
The name (ID) of the selected die. Tap Change Tools to modify or select from the die
library.
Press the Change Tools button to get an overview of the available tools in the library.
4.2.7. Auxiliary axes
Auxiliary axis
The position of the selected axis.
Retract
Retract distance of the selected axis in the current bend. The "backgauge retract" is
started when the beam is pinching the sheet.
Speed
Speed of the selected axis in the current bend. Speed can be programmed in a
percentage of the maximum possible speed.
Layon
Toggle between lay surface on finger or not. This option is only selectable in case you
have an R-axis in your machine.