V0817, 8.25
8.6. Maintenance
On this tab maintenance related functions are located. Next to the machine hour counter and
the machine stroke counter also functions to help replace modules and to store diagnostic
data can be found here.
Hours
The number of hours the machine is running.
Strokes
The number of strokes the pressbeam has executed.
Diagnostic mode
Activate or de-activate a diagnostic mode for service purposes. The diagnostic mode is
activated by programming a special code here. The diagnostic mode is de-activated by
programming 0.
To activate the diagnostic mode, contact the machine manufacturer for more
information about this mode and an access code.
Lock screen
To lock the screen, and e.g. clean the screen without changing anything, the Lock Screen
function can be used. The screen is unlocked automatically after 5 seconds.
Create .dat-file
Tapping Create .dat-file will store the most important product and control data, by default on
the connected USB stick. This information can be helpful for the maintenance support.
To Next Page
Loading...
