Figure 1 DP4400 network and iDRAC connections
Procedure
1. On the service computer, assign the static IP address 192.168.100.98 and the
subnet mask 255.255.255.0 for the Ethernet interface that is connected to
the DP4400.
A default gateway is not required.
2. Verify that the ACM responds to a ping on the default ACM IP address,
192.168.100.100.
3. To connect to the ACM user interface, type https://192.168.100.100:8543/
in a browser window.
4. Log in to the ACM with the default system account username and password:
l
User Name: root
l
Password: Idpa_1234
5. Provide a new password when prompted.
This password will be assigned to all appliance components. It must contain 9–
20 characters and include at least one of each type of supported character. The
following types of characters are supported:
l
Uppercase letters (A–Z)
l
Lowercase letters (a–z)
l
Numbers (0–9)
l
Special characters: period (.), hyphen (-), and underscore (_)
The password must not include common names or usernames such as root or
admin. Also, the password must not start with a hyphen (-) and end with a
period (.).
The system logs you out after changing the password. Log back in with the new
password.
6. On the End User License Agreement screen, accept the EULA.
Setting up the IDPA Appliance
Connect to the ACM 15
To Next Page
Loading...
