Dell EMC IDPA DP4400 - Page 23

l
Avamar server IP address in the Backup node section.
l
Image Proxy IP address in the Integrated Data Protection Appliance
backup.
c. In the IDPA System Manager page, enter the IP address in the Server IP
Address field.
d. In the Reporting and Analytics page, enter the IP addresses in the
Application server IP address and Datastore server IP address fields.
e. In the Search page, enter the IP address in the Index Master Node IP
address.
f. In the Cloud Disaster Recovery page, enter the IP address in the Cloud DR
Add On IP address.
Note
The Reporting and Analytics, Search, and Cloud Disaster Recovery pages are
displayed if you select the optional components in the Welcome page.
The Configuration progress page is displayed. You can view the configuration
progress for each component in addition to the configuration progress for the
appliance.
9. In the Customer information page, enter information in the mandatory fields.
l
Administrator email
l
Company Name
l
Admin contact name
l
Admin contact number
l
Location
l
Site ID
10. Click Next.
11. In the Summary page, review the information that you entered and click
Submit to start the configuration.
12. In the Configuration progress page, you can perform the following actions.
Note
You can perform these actions after the installation is complete.
a. View the Errors, Warnings, and Diagnostic report.
b. Click Download PDF to download a PDF of the configuration progress.
c. Click Download Solution ID to download the solution ID.
d. Click Download Configuration to download the configuration.
e. Click Download configuration XML to download the configuration XML file.
13. Click Finish.
The IDPA Appliance is installed and deployed.
Setting up the IDPA Appliance
Install and deploy IDPA 23