Figure 60. Installing the NDC
1.
captive screw socket (2) 2. connector on the system board
3. captive screw (2) 4. touch point (2)
5. NDC 6. back panel slots for Ethernet connectors
Follow the procedure listed in the After working inside your system section.
Related references
安全说明 on page 72
Related tasks
拆装系统内部组件之前 on page 73
Installing expansion card risers on page 111
拆装系统内部组件之后 on page 73
Removing the network daughter card on page 120
Identifier
GUID-41344D5D-E4CF-4B9D-845A-B530EBDCFF7E
Version 8
Status Translation Validated
处理器和散热器
请使用以下步骤进行：
● 卸下和安装散热器
● 安装其他处理器
● 更换处理器
注: 要确保正确冷却，必须在所有空处理器插槽中安装处理器挡片。
122 安装和卸下系统组件
To Next Page
Loading...
