Related references
安全说明 on page 72
Related tasks
拆装系统内部组件之前 on page 73
安装扩展卡 on page 110
Installing expansion card risers on page 111
拆装系统内部组件之后 on page 73
Identifier GUID-6B29D012-C73E-41D2-866B-E88F634F5786
Version 5
Status Released
Removing an expansion card
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
CAUTION: 多数维修只能由经认证的维修技术人员进行。您只能根据产品说明文件中的授权，或者在联机或电话服务和支持
团队的指导下进行故障排除和简单维修。任何未经 Dell 授权的服务所导致的损坏均不在保修范围之列。请阅读并遵循您的
产品附带的安全说明。
1. Disconnect any cables connected to the expansion card or expansion card riser.
2. To remove the expansion card, lift the expansion card latch.
3. Hold the expansion card by its edges and remove it from the expansion card connector on the riser.
4. If you are removing the card permanently, install a metal filler bracket over the empty expansion slot opening and close the
expansion card latch.
NOTE:
You must install filler bracket over an empty expansion card slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
Figure 50. Removing an expansion card
1.
expansion card connector 2. expansion card latch
3. expansion card 4. expansion card connector on the system board
Follow the procedure listed in the After working inside your system section.
Related references
安全说明 on page 72
安装和卸下系
统组件 109
To Next Page
Loading...
