Dell EMC PowerEdge R630 - Jumpers and Connectors; System Board Jumper Settings

Identifier GUID-4DD3160B-A6B1-49E6-8746-61291A7BA385
Version 4
Status Translation Validated
跳线和连接器
本主题提供了有关跳线的具体信息，还提供了有关跳线和交换机的一些基本信息，并介绍系统中各个板上的连接器。系统板上的
跳线可用于禁用系统和设置密码。您必须了解系统板上的连接器才能正确安装组件和电缆。
主题：
• System board jumper settings
• 系统板跳线和连接器
• Disabling a forgotten password
Identifier
GUID-D6192D1A-9392-4EE6-83E3-D3A5023AC85C
Version 4
Status Released
System board jumper settings
For information about resetting the password jumper to disable a password, see the Disabling a forgotten password section.
Table 45. System board jumper settings
Jumper Setting Description
PWRD_EN
(default)
The password feature is enabled (pins 4–6).
The password feature is disabled (pins 2–4). iDRAC local
access is unlocked at the next AC power cycle.
NVRAM_CLR
(default)
The configuration settings are retained at 系统 boot (pins 1–
3).
The configuration settings are cleared at the next 系统 boot
(pins 3–5).
Related tasks
Disabling a forgotten password on page 172
8
跳线和连接器 169