Identifier GUID-EBF28BA7-CF51-4E01-AFAE-A39705B2786F
Version 4
Status Released
Installing the hard drive backplane
CAUTION: 多数维修只能由经认证的维修技术人员进行。您只能根据产品说明文件中的授权，或者在联机或电话服务和支持
团队的指导下进行故障排除和简单维修。任何未经 Dell 授权的服务所导致的损坏均不在保修范围之列。请阅读并遵循您的
产品附带的安全说明。
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
1. Use the hooks on the chassis as guides to align the hard drive backplane.
2. Lower the hard drive backplane until the release tabs snap into place.
3. Connect the SAS/SATA/SSD data, signal, and power cables to the backplane.
Figure 85. Installing the 2.5-inch (x8) hard drive backplane
1.
backplane signal cable 2. backplane signal cable
3. SAS A cable 4. release tabs (2)
5. SAS B cable 6. backplane
安装和卸下系统组件 149
To Next Page
Loading...
