Figure 13. Boot option filter
4. From the BIOS screen, use the arrow keys to select the Boot tab and press Enter to change the boot option priority.
5. Using the arrow keys, select the listing of the driver on the bootable USB drive and then press Enter.
Figure 14. Select USB drive
6. Press F4 to save the selection and to exit the selection screen.
7. When prompted to confirm the option to Save & Exit?, select Yes and press Enter.
Installation of Ubuntu 18.10 operating system
This section provides the steps necessary to install the Ubuntu 18.10 operating system.
To install Ubuntu 18.10, perform the following steps:
1. From the GNU GRUB screen, use the arrow keys to select the Install Ubuntu Server option.
2. Press the e key to verify the installation menu entry.
Configure BIOS and install Ubuntu 18.10 operating system
13
To Next Page
Loading...
Need help?
General
