EasyManuals Logo

Dell EMC Virtual Edge Platform 1405 Series User Manual

Dell EMC Virtual Edge Platform 1405 Series
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Figure 17. Server environment snap listing
16. After the installation process is complete, remove the USB drive from the device then select Reboot Now.
Configure BIOS to boot from SSD
The information in this section provides the instructions for configuring the BIOS to boot from the SSD.
1. From the BIOS screen, use the arrow keys to select the Boot tab and press Enter to change the boot option priority.
2. Using the arrow keys, change the Boot Option filter to Flash Drive and then press Enter.
Figure 18. Flash drive selection
3. Press Enter to save the selection, then press F4 to save and exit the Boot screen.
4. When prompted to confirm the option to Save configuration and exit?, select Yes and press Enter. The system starts to boot.
When the boot process is complete, the log in prompt displays.
Configure BIOS and install Ubuntu 18.10 operating system
15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell EMC Virtual Edge Platform 1405 Series and is the answer not in the manual?

Dell EMC Virtual Edge Platform 1405 Series Specifications

General IconGeneral
BrandDell EMC
ModelVirtual Edge Platform 1405 Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals