Dell EMC Virtual Edge Platform 1405 Series - 6 Configure BIOS and Install ADVA 18.3 Operating System Installation; Configure BIOS to Boot from USB

Configure BIOS and install ADVA 18.3
operating system installation
The information in this section details the steps to configure the BIOS for the installation of the ADVA 18.3 operating system.
Topics:
• Configure BIOS to boot from USB
• Install ADVA 18.3 operating system
• Configure BIOS to boot from SSD
Configure BIOS to boot from USB
To configure the BIOS to boot from the USB:
1. Boot the VEP1405 series system and press F2 during the boot process to enter the BIOS.
The BIOS Setup screen displays.
2. Select the Advanced menu tab and select CSM Configuration in BIOS Settings.
Figure 22. CMS configuration screen
3. Within the Boot option filter section, select UEFI and Legacy in the CSM.
6
Configure BIOS and install ADVA 18.3 operating system installation 19