Figure 33. Rufus configuration screen
8. Click Start.
9. After the creation of the bootable USB drive is complete, open the folder to ensure that the required files are listed.
Configure BIOS to boot from USB
To configure the BIOS to boot from the USB:
1. Boot the VEP1405 system and go to the BIOS settings screen.
2. From the BIOS screen, select the Advanced tab.
3. Using the arrow keys, select CSM Configuration and then press Enter.
Figure 34. BIOS screen - Advanced tab
4. From the CSM Configuration screen, verify that UEFI is selected for the Boot option filter.
26
Download and install VMware ESXi 6.7
To Next Page
Loading...
Need help?
General
