Replacing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the battery with the screw holes on the palm-rest
assembly.
2 Replace the four screws (M2x3) that secure the battery to the palm-rest
assembly.
3 Route the speaker cable through the routing guides on the battery.
Post-requisites
Replace the base cover.
20
To Next Page
Loading...
