Dell 13 7000 2-in-1 - Removing the Keyboard; Prerequisites; Procedure

Removing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the coin-cell battery.
4 Remove the wireless card.
5 Remove the display assembly.
6 Remove the I/O board.
7 Remove the solid-state drive.
8 Remove the heat sink.
9 Remove the fan.
10 Remove the system board.
Procedure
1 Peel o the two adhesive tapes that secure the touchpad to the keyboard
bracket.
2 Remove the 27 screws (M1.4x2) that secure the keyboard bracket and the
keyboard to the palm-rest assembly.
64