Removing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Disconnect the fan cable from the system board.
2 Remove the I/O-board cable from the routing guides on the fan.
3 Remove the two screws (M2x3) that secure the fan to the keyboard bracket.
27
To Next Page
Loading...
