Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Insert the power-adapter port into the slot on the palm-rest assembly.
2 Replace the screw (M2x3) that secures the power adapter port to the palm-rest
assembly.
3 Connect the power-adapter port cable to the system board.
Post-requisites
Replace the base cover.
35
To Next Page
Loading...
