Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Using the alignment posts, align and place the right speaker on the palm-rest
assembly.
2 Adhere the tape that secures the speaker cable to the palm-rest assembly.
3 Route the speaker cable through the routing guides on the battery.
4 Using the alignment posts, align and place the left speaker on the palm-rest
assembly.
5 Connect the speaker cable to the system board.
Post-requisites
Replace the base cover.
32
To Next Page
Loading...
