Removing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Follow the procedure from step 1 to step 4 in Removing the wireless card.
Procedure
1 Remove the antenna cables from the routing guides on the palm-rest assembly.
2 Peel oî the adhesive tapes that secure the display cable and touchscreen-board
cable to the system board.
3 Open the latch and disconnect the display cable from the system board.
40
To Next Page
Loading...
