Power Management
USB Wake Support Enable the USB devices to wake the computer from
Standby.
Wake on LAN Enable the LAN signal to wake the computer from
the o state or hibernation.
NOTE: This feature only works when the
computer is connected to AC.
Advanced Battery Charge
Conguration
Enable Advanced Battery Charge Conguration
from the beginning of the day to a specied work
period.
Primary Battery Charge
Conguration
Set the primary battery charge settings with a
preselected custom charge start and stop.
Default: Adaptive.
Table 11. System setup options—POST Behavior menu
POST Behavior
Adapter Warnings Enable adapter warnings.
Default: Enabled.
Fn Lock Options Enable or disable the Fn lock mode.
Fastboot Enable to set the speed of the boot process.
Default: Thorough.
Extended BIOS POST Time Creates an additional pre-boot delay.
Full Screen Logo Enable to display full screen logo.
Warnings and Errors Specify whether the boot process will continue or
prompt for user input when warnings and errors are
detected.
NOTE: Critical errors will always halt the
system.
85
To Next Page
Loading...
