Printer Settings
The Printer Settings tab includes System Settings page.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Printer Maintenance
The Printer Maintenance tab includes Paper Density, Adjust BTR, Adjust Fuser, Auto Registration Adjustment, Color Registration Adjustments, Adjust
Altitude, Reset Defaults, Non-Dell Toner, Initialize PrintMeter, and Web Link Customization pages.
Paper Density
Purpose:
To specify the paper density.
Values:
Click the Start button to print the job history report.
Click the Start button to print the error history report.
Click the Start button to print the color test page.
Displays the amount of time before the printer enters the power saver timer mode 1 after it finishes a print job.
Displays the amount of time before the printer enters the power saver timer mode 2 after it finishes a print job.
Displays whether the printer sounds the tone for the panel.
Displays whether the printer sounds the tone when the machine becomes ready.
Displays whether the printer sounds the tone when a job is completed.
Displays whether the printer sounds the tone when an error occurs.
Specifies whether the printer sounds an alarm when an error occurs.
Displays whether the printer sounds the tone when the paper runs out.
Displays whether the printer sounds the tone when the toner is low.
Specifies the amount of time the printer waits to receive additional bytes of data from the computer. When this timeout expires,
the print job is canceled.
Determine the language to be used for E-mail Alert.
Specifies whether the printer outputs logs automatically.
Sets the paper density in Light for the plain paper.
Sets the paper density in Normal for the plain paper.
To Next Page
Loading...
Need help?
General
