Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Align the power-adapter port in the slot on the palm-rest assembly.
2 Align the screw hole on the power-adapter port bracket with the screw hole
on the palm-rest assembly.
3 Replace the screw (M2x3) that secures the power-adapter port bracket to
the palm-rest assembly.
100
To Next Page
Loading...
