Dell Alienware 15 R4 - Removing the Computer Base; Prerequisites; Procedure

Removing the computer base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Follow the procedure from step 1 to step 3 in "Removing the hard drive".
3 Remove the solid-state drive.
4 Remove the wireless card.
5 Remove the rear-I/O cover.
Procedure
1 Note the antenna cables routing and remove the antenna cables from the
routing guides on the computer base.
44