Replacing the touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Using the alignment posts on the palm-rest assembly, place the touchpad to
the palm-rest assembly.
NOTE: Clean the adhesive thoroughly on the palm-rest assembly to
avoid having gap between the touchpad and the palm-rest assembly.
62
To Next Page
Loading...
