Removing the computer
base
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before working inside your computer.
After working inside your computer, follow the instructions
in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base panel.
2 Remove the wireless card.
3 Follow the procedure from step 1 to step 9 in “Removing the palm rest”.
4 Remove the display assembly.
5 Remove the power-adapter port.
6 Remove the battery.
7 Remove the speakers.
8 Remove the I/O board.
9 Remove the subwoofer.
Procedure
After performing the prerequisites, we are left with the computer base.
114
To Next Page
Loading...
Need help?
General